Angel rescued sick girl true story!

Angel rescued sick girl â€" true story! This incident happened in Charlotte, North Carolina, USA, in September 2008. 14-year-old Chelsea Barton was born five weeks prematurely which resulted in developmental disabilities and serious health problems all her life.Chelsea got sick very easily and going back and forth to the hospital very often. In 2008, she caught pneumonia and was eventually put on life support at Presbyterian Hospital in Charlotte, North Carolina.Doctors told Chelseas mother that there was no hope for young Chelseas recovery. The family gathered one last time in Chelseas hospital room to say their goodbyes and the order was giving to disconnect her from the life support system and just let nature take its course.It appeared that Chelsea had another visitor just after the life support was disconnected!As her mother waited for the girl to take her last breath, an image of bright light appeared on the hospitals security monitor screen. Within an hour, the dying girl began a recovery that doctors were at a los s to explain.The mother and other workers noticed an image of an angel in light on the security surveillance monitor near the hospital room door and the mother managed to capture the image with her cell phone camera.The mother told that at first she thought that it was the angel-of-death coming to take her daughter but shortly afterwards Chelsea started showing signs of improvement.It would be another two months before Chelsea finally left the hospital to return home but her mother is so convinced that Chelsea was saved by divine intervention.God is real and does care for us!Sources: MSNBC News Truth or Fiction. Video Coverage From MSNBC News:

An Autoimmune Disorder Of The Central Nervous System

Multiple Sclerosis Brandi McKinney PTH 246 Jean Hamrick June 25, 2015 Introduction Multiple Sclerosis, an autoimmune disorder of the central nervous system, was first discovered in 1868 by Jean-Martin Charcot.1,2 He defined it by its â€Å"clinical and pathological characteristics: paralysis and the cardinal symptoms of intention tremor, scanning speech, and nystagmus, later termed Charcot’s triad.†2 In Physical Rehabilitation, O’Sullivan, Schmitz, and Fulk defined multiple sclerosis as â€Å"a chronic disease of the central nervous system characterized by inflammation, selective demyelination, and gliosis of neurons of the brain and spinal cord.†2 This results in disruptions in the conduction of nerve impulses.2 The National Multiple Sclerosis Society states that more than 2.3 million people are affected by MS worldwide.1 There is no cure for Multiple Sclerosis, but several treatments can be given to help reduce complications and expand the individual’s lifespan. This paper will discuss the anatomy of a neuron, predisposing factors and causes of MS, the disease course of MS, common signs and symptoms, how to diagnose and evaluate for MS, psychological effects of the disease on the patient and his/her family, possible treatment options, cost association with treatment and disability, and special needs and resources in the community to assist patients with MS. Anatomy In order to understand how MS affects the body, one must have a general understanding of the anatomy ofShow MoreRelated Patalogy of the Central Nevrvous System: Multiple Sclerosis1213 Words   |  5 PagesMultiple Sclerosis: Pathology of the Central Nervous System Multiple Sclerosis is an autoimmune disease that commonly found in individuals between the ages of 20 and 40. While men with MS tend to have a faster progressing disease, women are more likely than men to develop it. MS comes in many forms due to the extent of the damage and the amount of lesions, along with how quickly it progresses. All of this collectively forms the MS community today and has resulted in new test methods and forms ofRead MoreSimilarities and Differences amongst Multiple Sclerosis and Muscular Dystrophy640 Words   |  3 PagesThere are differences and similarities between multiple sclerosis and muscular dystrophy. Multiple sclerosis is understood to be an autoimmune disease that affects the central nervous system. However, muscular dystrophy is a genetic disorder that affects the peripheral nervous system. Multiple sclerosis is seen as progressing asymmetrically from the loss of myelin. Likewise, muscular dystrophy presents with a symmetrical wasting of the musc le and distribution of weakness. Muscular dystrophy is aRead MoreThe Disease Of Behcet s Disease924 Words   |  4 PagesBehcet, who is a dermatologist in Turkey. The disease is also known as Behcet s syndrome and described by The American Behcet s Disease Association (2014) as a rare, chronic, autoimmune, autoinflammatory disorder (American Behcet s Disease Association [ABDA], 2014). The disease, recognized worldwide, can affect multiple systems in the human body and associated with morbidity and mortality. Dr. Hulusi Behcet (2014) first described the disease as a triad of oral ulcers, genital ulcers and ocular inflammationRead MoreEssay on Paleo Diet for Autoimmune Disorders 706 Words   |  3 PagesPaleo Diet for Autoimmune Disorders Our body’s immune system protects us from infections and diseases. When the immune system begin attacking healthy cells and tissues in the body, this can trigger autoimmune diseases. This disorder tend to run in families and women particularly Hispanic-American, Native American, and African-American have the higher risk. Treatment involves attempts in controlling the process of the disease as well as reducing the symptoms. Medications and supplements can beRead MoreSymptoms Of Multiple Sclerosis And Bell s Palsy1347 Words   |  6 PagesAbnormalities Jessica Schultz Brigham Young University – Idaho â€Æ' Neurological Abnormalities Bell’s Palsy Bell’s palsy is a condition that affects the muscles of the face. The muscles become weak and slow for an impermanent period of time. This disorder occurs when the nerve that controls the facial muscles, cranial nerve VII, becomes inflamed or swollen. The cause of the damaged is not officially known, but researchers believe that is could be the result of a viral infection. The following areRead MoreDiscussion. Cause. Systemic Lupus Erythematosus Is Complex1711 Words   |  7 PagesDiscussion Cause Systemic Lupus Erythematosus is complex autoimmune disease caused by a combination of genetic, epigenetic, and environmental factors. The body’s autoimmune cells fail to distinguish a diseased cell or foreign organism from its own healthy cells. Consequently, the autoimmune system attacks its own cells causing inflammation in multiple systems including; the kidneys, skin, heart, lungs, hematopoetic, and nervous system. An estimation of 20 – 100 different genetic factors makeRead MoreSymptoms And Treatment Of Autoimmune Diseases834 Words   |  4 Pages2.Classification of autoimmune diseases Autoimmune diseases are caused by auto-antibodies, according to auto-antibodies can be divided into: organ-specific, which affects one organ; non-organ specific, which are a multisystem disease. 2.1. Organ-specific 2.1.1. Autoimmune thyroid diseases They are a common cause of thyroid disorders and it is caused by auto-antibodies against the thyroid stimulating hormone receptor (TSH), intracytoplasmic antigen or thyroglobulin. 2.1.1.1.Grave s disease GraveRead MoreICL Case Study723 Words   |  3 PagesICL was first defined by Center for Disease Control and Prevention in 1992 as low CD4 cell counts in the absence of HIV and other secondary causes of immunodeficiency. Idiopathic CD4 Lymphopenia is a rare immunological disorder associated with persistent Low CD4 counts. The mean age at diagnosis is 41 years with slight male predominance [1]. Diagnosis Criteria for ICL includes low CD4 count 300 cells or 20% of the total Lymphocyte count in the absence of HIV infection and secondary evidence ofRead MoreEvaluation Of A Case Study1353 Words   |  6 Pagesthe patient’s own immune system attacks the protein that is found in the myelin sheath and this result in the demyelination of the myelin sheath. So when there is lost of myelin in one’s body, blocking of the action potential propagation occurs and this lead to the patient to experience the sign and symptoms, the client physical weakness especially balance and coordi nation in her lower extremities played a role in affecting the client. Factors that could trigger this disorder includes: infection, physicalRead MoreEvaluation Of A Case Study1315 Words   |  6 Pagespatient’s own immune system attacks the protein that is found in the myelin sheath and this result in the demyelination of the myelin sheath. So when there is lost of myelin in one’s body, blocking of the action potential propagation occurs and this lead to the patient to experience the sign and symptoms, the client physical weakness especially balance and coordination in her lower extremities played a role in affecting the client. Factors that could trigger this disorder includes: infection, physical

Airline Customer Relationship Management Tool Free Essays

* Airline Customer Relationship Management Tool INDEX 1. Introduction 2. System Analysis a. We will write a custom essay sample on Airline Customer Relationship Management Tool or any similar topic only for you Order Now Existing System b. proposed System 3. Feasibility Report a. Technical Feasibility b. Operational Feasibility c. Economical Feasibility 4. System Requirement Specification Document a. Overview b. Modules Description c. Process Flow d. SDLC Methodology e. Software Requirements f. Hardware Requirements 5. System Design a. DFD b. E-R diagram c. UML d. Data Dictionary 6. Technology Description 7. Coding 8. Testing Debugging Techniques 9. Output Screens 10. Reports 11. Future Enhancements 2. Conclusion 13. Bibliography * INTRODUCTION The Main Objective of this System is to design a system to accommodate the needs of customers. This application helps a customer to know about the flight’s information and can reserve seats throughout the globe irrespective of the location. This is a computerized system to make seats reservations, keep ticket bookings and availability details up-to-date. This web based system provides all flight’s information, availability of flights, availabil ity of seats. It contains information about pilots, air hostess and airport information. It also provides time schedules for different flights and source, destination details. It provides cost of tickets and enquiry details. Features of the project Reduces the complexity present in the manual system and saves time. 1. Users can access the required data easily. 2. It maintains accurate information. 3. Provides instantaneous updated information to all users. 4. Communication is fast and clear and avoids misunderstandings. It is a computerized system to make room reservations and keep room bookings and availability of details up-to-date System Analysis Purpose of the System This web based system provides all flight’s information, availability of flights, availability of seats. It contains information about pilots, air hostess and airport information. It also provides time schedules for different flights and source, destination details. It provides cost of tickets and enquiry details. Existing System * This system doesn’t provide register the multiple Flights * This system doesn’t provide online help to the public Proposed System The development of this new system contains the following activities, which try to develop on-line application by keeping the entire process in the view of database integration approach. * This system provide online help to the public * This system provide agents registration and book the bulk tickets * This system provide late running flights information before 3 hours * Online status of the tickets must be provided in real time Feasibility Study TECHNICAL FEASIBILITY Evaluating the technical feasibility is the trickiest part of a feasibility study. This is because, at this point in time, not too many detailed design of the system, making it difficult to access issues like performance, costs on (on account of the kind of technology to be deployed) etc. A number of issues have to be considered while doing a technical analysis. i) Understand the different technologies involved in the proposed system Before commencing the project, we have to be very clear about what are the technologies that are to be required for the development of the new system. i) Find out whether the organization currently possesses the required technologies * Is the required technology available with the organization? * If so is the capacity sufficient? For instance – â€Å"Will the current printer be able to handle the new reports and forms required for the new system? † OPERATIONAL FEASIBILITY Proposed projects are beneficial only if they can be turned into information systems that will meet the organizations operating requirements. Simply sta ted, this test of feasibility asks if the system will work when it is developed and installed. Are there major barriers to Implementation? Here are questions that will help test the operational feasibility of a project: * Is there sufficient support for the project from management from users? If the current system is well liked and used to the extent that persons will not be able to see reasons for change, there may be resistance. * Are the current business methods acceptable to the user? If they are not, Users may welcome a change that will bring about a more operational and useful systems. * Have the user been involved in the planning and development of the project? Early involvement reduces the chances of resistance to the system and in * General and increases the likelihood of successful project. Since the proposed system was to help reduce the hardships encountered. In the existing manual system, the new system was considered to be operational feasible. ECONOMICAL FEASIBILITY Economic feasibility attempts 2 weigh the costs of developing and implementing a new system, agai nst the benefits that would accrue from having the new system in place. This feasibility study gives the top management the economic justification for the new system. A simple economic analysis which gives the actual comparison of costs and benefits are much more meaningful in this case. In addition, this proves to be a useful point of reference to compare actual costs as the project progresses. There could be various types of intangible benefits on account of automation. These could include increased customer satisfaction, improvement in product quality better decision making timeliness of information, expediting activities, improved accuracy of operations, better documentation and record keeping, faster retrieval of information, better employee morale. System Requirement Specification Modules Description No of Modules The system after careful analysis has been identified to be presented with the following modules: The Modules involved are 1. Admin 2. Flight 3. Reservation SDLC METHDOLOGIES This document play a vital role in the development of life cycle (SDLC) as it describes the complete requirement of the system. It means for use by developers and will be the basic during testing phase. Any changes made to the requirements in the future will have to go through formal change approval process. SPIRAL MODEL was defined by Barry Boehm in his 1988 article, â€Å"A spiral Model of Software Development and Enhancement. This model was not the first model to discuss iterative development, but it was the first model to explain why the iteration models. As originally envisioned, the iterations were typically 6 months to 2 years long. Each phase starts with a design goal and ends with a client reviewing the progress thus far. Analysis and engineering efforts are applied at each phase of the project, with an eye toward the end goal of the project. The steps for Spiral Model can be generalized as follows: * The new system requirements are defined in as much details as possible. This usually involves interviewing a number of users representing all the external or internal users and other aspects of the existing system. * A preliminary design is created for the new system. * A first prototype of the new system is constructed from the preliminary design. This is usually a scaled-down system, and represents an approximation of the characteristics of the final product. A second prototype is evolved by a fourfold procedure: 1. Evaluating the first prototype in terms of its strengths, weakness, and risks. 2. Defining the requirements of the second prototype. 3. Planning an designing the second prototype. 4. Constructing and testing the second prototype. * At the customer option, the entire project can be aborted if the risk is deemed too great. Risk factors might involved development cost overruns, operating-cost miscalculation, or an y other factor that could, in the customer’s judgment, result in a less-than-satisfactory final product. * The existing prototype is evaluated in the same manner as was the previous prototype, and if necessary, another prototype is developed from it according to the fourfold procedure outlined above. * The preceding steps are iterated until the customer is satisfied that the refined prototype represents the final product desired. * The final system is constructed, based on the refined prototype. * The final system is thoroughly evaluated and tested. Routine maintenance is carried on a continuing basis to prevent large scale failures and to minimize down time. The following diagram shows how a spiral model acts like: Fig 1. 0-Spiral Model ADVANTAGES * Estimates(i. e. budget, schedule etc . ) become more relistic as work progresses, because important issues discoved earlier. * It is more able to cope with the changes that are software development generally entails. * Software engineers can get their hands in and start woring on the core of a project earlier. SOFTWARE REQUIREMENT AND HARDWARE REQUIREMENT Software Requirements Operating System:Windows XP Professional or Above. Languages:C#. NET, ASP. NET Data Base:SQL Server. Web Server: IIS 5. 0 OR Above. Hardware Requirements Processor:Pentium IV Hard Disk:40GB RAM:512MB or more How to cite Airline Customer Relationship Management Tool, Essay examples

Renaissance Music Essays - Classical Music, Music, Renaissance Music

Renaissance Music The Renaissance was a period by which modern scholars consider as that between 1350 ?1600. Abundant in this new age was inventions and individualistic beliefs. Changes in music and cultural behavior were some of the most evident development from its predecessor of the Middle ages. Period of new inventions, belief, musical styles of freedom, and individuality. It was a period of exploration and adventure from 1492-1519, which saw the likes of Christopher Columbus, Vasco da Gama, and Ferdinand Magellan. This was a drastic difference from the Middle Ages where the church held most of the power. The power was slowly transferring to the artist, musician, and people of high society. The word ? Renaissance? means rebirth. Used by artist and musician to recover and apply the ancient learning and standards of Greece and Rome. Rich Italian cities, such as Florence, Ferrari, and milanland Venice started the Renaissance Age. Because these cities were very wealthy, people started spending money on different things, such as painting, learning materials, and new systems of government. These were good times for most and because of the ever-changing styles and attitudes towards culture and the church, music was the best buy for the money. This all gave rise to a new type of scholar, called the humanist. Humanism was a subject concerned with human kind and the culture. Painters and sculptors now used subjects from classical literature and mythology such as characters from Homers epic poems. Painters like Raphael and Leonardo da Vinci were more interested in realism and used linear perspective in creating their subjects. The nude body was a favorite theme of the ages where as in the Middle Ages was an object of shame and concealment. Artist was no longer regarded as mere artisans, as they were known in the past, b ut for the first time emerged as independent thinkers. The Catholic Church was far less powerful now than they had been in the Middle ages. The church no longer monopolized learning or the minds of the common worshiper. Aristocrats and the upper middle class now considered education a status symbol and music was an intricate part of that status quote. The invention of print accelerated the spread of learning. Johan Gutenberg was credited with printing the first Bible during this period, which gave this excellent piece of literature a wider audience. The printing press made books much easier to come by which made them cheaper. Now common people could afford a literary luxury, which was once only accessible to the rich. Therefore, literacy became more widespread since common people had access to all forms of print to include music. With the Renaissance was the idea of the universal man, every educated person was expected to be trained in music. As in the Middle Ages, the musicians worked in churches, courts and towns. The church remained an important patron of music, but musical activity gradually shifted to the courtyards. Kings princes and dukes competed for the finest composers. With this, new found fame musicians enjoyed higher status and pay than ever before. Composers were regarded higher and held important positions throughout Europe. Many musicians became interested in politics in hopes that their status as a musician or composer would help to foster ones careers. This was a sharp contrast from most of the Renaissance composers and musicians. Most were from the Low Countries and from families that were not of prominate nobility. In the renaissance, as in the Middle Ages vocal music was more important than instrumental music. The humanistic interest in language influenced vocal music in a new way. As a result, an especially close relationship was created between words and music. Composers often used word painting, musical representation of specific poetic images. Renaissance music sounds were more full than medieval music and had a more pleasing affect to the ear. New emphasis was put on the bass line for a richer harmony. Choruses music did not need instrumental accompaniment. The period was called the gold age of unaccompanied "a Cappella" choral music. This is where the present day barber shops quartet originated. This new technique made renaissance music both a pleasure and challenge, for each singer had to maintain an individual rhythm. This must

Arab Nations Essay Example

Arab Nations Essay Example Arab Nations Essay Arab Nations Essay World War to current day, the Arabs have struggled to create a prospering nation of their own. The Arab states are underdeveloped because of the lack of support from the sthronger nations around the world. The most important questions to be asked are why is the Middle East such a mess? How can the United States help? And How are they helping themselves? The Middle East has gone through years of hardship even though they were one a dominant culture. The Middle East is a mess for numerous reasons starting with the first world ar. After the great powers of England and France won the first world war, there was a lot of land to divide up and give away. Through the Husan-McMahon Letter, a portion of the Ottoman Empire was promised to the Arabs in order for them to form there own homeland. Although, this land was promised land was also promised to the Jews, who altimatley received there own homeland. The Arabs were angered by this which started a permanent grudge against the worlds super powers. Following this England and France put there own allies in power over the Arab states. This only ook the anger of the Arabs further which would altimately started revolts. The strict religious governments and corrupt governments over powered the freedom of the Arab people. Without freedom the public felt as though there own government had betrayed them. These governments only pointed to one country which is the United States. The US has been involved in many world affairs, but we have failed to help the Arabs because of our partnership with Israel. The US can help the Arab states by providing them with materials to take over there own country. If the Arabs can finally ave there own homeland it might start recovering a huge gap between the two cultures. Also, America should allow Arab sstudents to study in America and learn our culture closer. This will allow the Arab people to know more about us. Lastly, In the future America should be able to have peace treaties with the Arab people so that we can have an end to this brutal war and hatred. The Arab states have finally learned of there own strength in recent events. Since 2010 there have been movements known as the Arap spring, This movement is revolts against corrupt governments to put democracy into place. The Arabs are helping themselves by forming together and forcing change on there governments. Instead of waiting for help like there were doing, they decided to take control of there own country. By putting a democracy together these nations will come together through equality. The underdeveloped Arab states are there own faults even though they do not nave tnere own nomelana. we nave now seen nat t tne Aran states dont need nelp from superpowers and can do it on there own. The questions of the middle east have shown that there is a lot of anger towards the United States.

Ancestry of Barack Obama - Fourth Generation

Ancestry of Barack Obama - Fourth Generation Barack Obama Family Tree, Generations 1-3 Fourth Generation (Great Grandparents): 8. Obama was born in Kendu Bay, Kenya 9. Nyaoke Obama had four wives, one of whom was Nyaoke. She fathered many children, of whom Onyango was the fifth son. 12. Ralph Waldo Emerson DUNHAM was born 24 December 1894 in Argonia, Sumner County, Kansas and died 4 October 1970 in Wichita, Sedgwick, Kansas. 13. Ruth Lucille ARMOUR was born in 1900 in Illinois and died (by suicide) on 25 November 1926 in Wichita, Sedgwick County, Kansas. Ralph DUNHAM and Ruth ARMOUR were married on 3 October 1915 in Wichita, Sedgwick County, Kansas and had the following children: i. Ralph Emerson DUNHAM, Jr., born 29 August 1916 (spouse Elizabeth Smith)6. ii. Stanley Armour DUNHAM The family is found living with Ruths parents in the 1920 federal census of Sedgwick County, Kansas. In 1930, Ralph Jr. and Stanley are with their maternal grandparents in Butler County, Kansas, while their father, Ralph Sr. was enumerated with his parents in Sedgwick County, Kansas. 14. Rolla Charles PAYNE was born 23 August 1892 in Olathe, Johnson County, Kansas and died in Kansas in October 1968. 15. Leona MCCURRY was born about May 1897 in Kansas. Rolla Charles PAYNE and Leona MCCURRY married in Kansas about 1922 and had the following children: 1. i. Madelyn PAYNEii. Charles Thomas PAYNE born in 1925.iii. Arlene PAYNE born about 1926.

Energy Conservation Lab Report Example | Topics and Well Written Essays - 1000 words

Energy Conservation - Lab Report Example The output graph 2 for kinetic energy and potential energy vs time is attached herein, for oscillating mass on a spring. The graph is in such way that the curve for potential energy and kinetic energy intersect each other at a particular point, which is consistent. The point at which the two are the same for all the data is 0.5, which is the arbitrary reference level used to measure the y coordinate. Further, it is also worth noting from the graph that at the point where kinetic energy is maximum, the potential energy is found to be at its minimum. There are few uncertainties, as shown by the number of outliers, leading to the conclusion that the experiment was accurate. Part 1 shows that there is conservation of energy in swinging pendulum. This is confirmed by the graph which indicates that at the point when potential energy is highest, the kinetic energy becomes zero. This is an indication that at this point, for the swinging pendulum, all the kinetic energy is converted to potential energy. At the lowest point of the swing, the potential energy is zero while the kinetic energy is at its highest (Teodorescu 11). This also applies to part 2, indicating that there is energy conservation in an oscillating mass on a spring. When the spring is fully stretched, the change in potential energy becomes highest because of increase in length while the kinetic energy remains at zero. In which case, when the y is increased, the kinetic energy reduces to zero while the potential energy rise to maximum. To confirm energy conservation, computing mechanical energy for these systems at various points indicated that the answer remained constant for the various data . Further, for the shot basketball, in part 3, the experiment was successful in confirming the energy conservation witnessed by a basketball. The conservation was confirmed when the ball was dropped from a certain height and bounced back to that similar height. However,